|
ARCHIVE
|
Issue 12
April 18, 2002
Vol. 2
Issue 12
|
Issue 11
March 13, 2002
Vol. 2
Issue 11
|
Issue 10
January 13, 2002
Vol. 2
Issue 10
|
Issue 9
November 20, 2001
Vol. 1
Issue 9
|
Issue 8
October 2, 2001
Vol. 2
Issue 8
|
Issue 7
September 20, 2001
Vol. 2
Issue 7
|
Issue 6
August 19, 2001
Vol. 2
Issue 6
|
Issue 5
July 1, 2001
Vol. 2
Issue 5
|
Issue 4
June 15, 2001
Vol. 2
Issue 4
|
Issue 3
May 23, 2001
Vol. 2
Issue 3
|
Issue 2
February 5, 2001
Vol. 2
Issue 2
|
Issue 1
January 19, 2001
Vol. 2
Issue 1
|
Issue 1
December 5, 2000
Vol. 1
Issue 1
|
|
|  |
|
|
|
WHAT'S NEW
|
Power Transducer Module
Measure Power Consumption, Monitor Voltages
The Power Transducer Module (PTM) is an intelligent system for measuring electrical power consumption or for monitoring voltages between an electrical generator and power grid. The Series 90-30 PTM is loaded with features that make it easy to measure RMS voltage and current, power, power factor, frequency, energy, and total 3-phase 15-minute power demand. The module has update rates of 1 second.
[FULL STORY]
|
CPU374 with High Capacity Battery
The CPU374 will start shipping this week. We would strongly suggest that for any oversea project that requires more than 1-month shipping/delivery, to order the IC693ACC302 extended battery pack for back up of continuous power loss.
[FULL STORY]
|
GE FANUC eCatalog
Shortcut to find good thing!
http://www.geindustrial.com/cwc/gefanuc/...
by Cambie Ling
Just a quick introduction of GE FANUC eCatalog. This is a useful web access that you will find information related with GE FANUC products, application, product comparison and many things you want to serach.
With eCatalog You get EVERYTHING you need!
Pleaes click it and try!
|
Modbus TCP Protocol added to 90-30 Ethernet Interface
IC693CMM321-FH
by Cambie Ling
The Series 90-30 Ethernet Interface (IC693CMM321) is being enhanced with the addition of Modbus TCP protocol. Both Client (Master) and Server (Slave) capabilities are being added. The new version is expected to be available (as a firmware upgrade) in the second half of June, shipment of new units is expected in early July. The price of the IC693CMM321 will not be affected.
[FULL STORY]
|
New Analog Expansion Units and 28 Point Discrete Expansion Units
by Cambie Ling
GE Fanuc's new VersaMax Micro expansion units expand application solutions, reduce panel space, and lower cost. VersaMax Micro expansions units are now available with 28-point discrete I/O and an anlog expansion unit with four in and two out. Benefits of the new units include allowing the user to optimize size and minimize cost.
[FULL STORY]
|
New VersaMax Nano with Analog Input Channel
by Cambie Ling
GE Fanuc's new VersaMax Nano is now available with an analog input channel. The nano is ideal for applications such as monitoring systems, air handlers, test equipment and other applications requiring small amounts of I/O. The new VersaMax Nanos come in either 12VDC or 24VDC control with relay outputs. The new units optimize size and minimize cost.
[FULL STORY]
|
Series 90-30 Profibus DP Master Module & Series 90-30 Profibus DP Slave Module
by Cambie Ling
GE Fanuc is pleased to introduce the Series 90-30 Profibus DP Master and Slave Modules - IC693PBM200 and IC693PBS201. These modules provide the Series 90-30 the capability of a PTO certified Profibus DP master & slave.
[FULL STORY]
|
New OPC Device Communication Servers
by Cambie Ling
GE Fanuc is pleased to announce the availability of five new OPC Servers - Mitsubishi FX Series Front Port, Modbus Plus, Siemens AS511, Siemens MPI, and Siemens TCP/IP. These new OPC Device Communication Servers are being sold to work with CIMPLICITY HMI Plant Edition or any other OPC based third party products. Please note that there is not a one to one features and functions match between the Mitsubishi and Modbus Plus OPC Servers and the HMI Device Communications Option modules
[FULL STORY]
|
CIMPLICITY Functional Upgrade Policy - 2002
by Cambie Ling
This is the update of the Functional Upgrade Policy for CIMPLICITY automation software. There are two types of CIMPLICITY upgrades - Functional and Version. Version upgrades are covered by the SAFE program and allow the customer to upgrade to the latest version of software.
If you are interested in it, please contact Cambie Ling to get the CIMPLICITY LICENSE FUNCTIONAL UPGRADE FORM.
[FULL STORY]
|
GE Fanuc Technical Training Program in Singapore
by George Koh
There is the latest training program of 2002 2nd-half year in Singapore. Refer to the inquiry, you can contact Mr. George Koh.
[FULL STORY]
|
|
|
| |
|
|
|
