New Page 1
Summary
GE Fanuc is pleased to announce the introduction
of four new VersaMax analog input modules. These modules can accept single-ended
or differential inputs. Modules are available for voltage or current inputs.
The modules are as follows:
- IC200ALG261: 15 Bit Differential Voltage, 8 Channel
- IC200ALG262: 15 Bit Differential Current, 8 Channel
- IC200ALG263: 15 Bit Voltage, 15 Channel
- IC200MDL264: 15 Bit Current, 15 Channel
Ordering Information
|
Catalog Number |
Description |
|
IC200ALG261 |
15 Bit Differential Voltage, 8 Channel Analog Input |
|
IC200ALG262 |
15 Bit Differential Current, 8 Channel Analog Input |
|
IC200ALG263 |
15 Bit Voltage, 15 Channel Analog Input |
|
IC200ALG264 |
15 Bit Current, 15 Channel Analog Input |
Related Documentation
GFK-1504 VersaMax Modules, Power Supplies, and Carriers
User’s Manual
Joanne
lim
Product
Marketing Engineer
IC200ALG261: 15
Bit Differential Voltage, 8 Channel Analog Input
Analog input module IC200ALG261 provides an interface to 8
differential voltage inputs.
The module receives power from the backplane power supply.
No external power source is required for module operation. Power for the user’s
transceivers must be supplied from an external source.
Intelligent processing for this module is performed by the
CPU or NIU. The module provides 8 words of analog input data.
Module Specifications
|
Module Characteristics |
|
Channels |
8 differential, one group |
|
Isolation:
User input to logic (optical) and to frame ground
Group to group
Channel to channel
|
250VAC continuous; 1500VAC for 1 minute
Not applicable
None |
|
LED indicators |
OK LED indicates backplane power is present |
|
Backplane current consumption |
5V output: 200mA maximum |
|
External power supply |
None |
|
Thermal derating |
None |
|
Configuration parameters |
None |
|
Diagnostics |
Loss of Internal Power |
|
Input Characteristics |
|
Input Voltage (Differential) |
-10V to +10V |
|
Input Voltage (Common Mode) |
-10V to +10V |
|
Input Impedance |
100K ohms minimum |
|
Accuracy (0V common mode):
25 degrees C*
0 to 60 degrees C
|
+/-0.3% typical of full scale, +/-0.5% maximum of full scale
+/-1% maximum of full scale
|
|
Resolution |
0.3125mV = 1 count |
|
Update rate |
7.5ms |
|
Compatibility |
|
VersaPro Software |
Version 2.0 or higher |
|
VersaMax PLC CPU Firmware |
Version 2.10 or higher |
|
VersaMax Ethernet NIU Firmware |
Version 1.10 or higher |
|
VersaMax DeviceNet, Profibus, or Genius NIU Firmware |
Version 2.10 or higher – Future Availability |
*
In the
presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be
degraded to +/-1%. Input accuracy may be degraded an additional +/-1% with the
introduction of input common mode voltage.
IC200ALG262: 15 Bit
Differential Current, 8 Channel Analog Input
Analog input module IC200ALG262 provides an interface to 8
current inputs.
The module receives power from the backplane power supply.
No external power source is required for module operation. Power for the user’s
transceivers must be supplied from an external source.
Intelligent processing for this module is performed by the
CPU or NIU. The module provides 8 words of analog input data.
Module Specifications
|
Module Characteristics |
|
Channels |
8 single ended, one group |
|
Isolation:
User input to logic (optical) and to frame ground
Group to group
Channel to channel
|
250VAC continuous; 1500VAC for 1 minute
Not applicable
None |
|
LED indicators |
OK LED indicates backplane power is present |
|
Backplane current consumption |
5V output: 200mA maximum |
|
External power supply |
None |
|
Thermal derating |
None |
|
Configuration parameters |
Range select (jumpers on carrier) |
|
Diagnostics |
Loss of Internal Power, Open wire detection of
4-20mA signals only |
|
Input Characteristics |
|
Input current |
4 to 20mA (default: no terminal jumper installed)
0 to 20mA (with terminal jumper installed) |
|
Common Mode Range |
-10V to +10V |
|
Input Impedance |
100 Ohms |
|
Accuracy (0V Common Mode):
25 degrees C*
0 to 60 degrees C
|
+/-0.3% typical of full scale, +/-0.5% maximum of full scale
+/-1% maximum of full scale
|
|
Resolution |
0.5m A = 1 counts (for 4-20mA range)
0.625m A = 1 counts (for 0-20mA range) |
|
Update rate |
7.5ms |
|
Compatibility |
|
VersaPro Software |
Version 2.0 or higher |
|
VersaMax PLC CPU Firmware |
Version 2.10 or higher |
|
VersaMax Ethernet NIU Firmware |
Version 1.10 or higher |
|
VersaMax DeviceNet, Profibus, or Genius NIU Firmware |
Version 2.10 or higher – Future Availability |
*
In the
presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be
degraded to +/-1%. Input accuracy may be degraded an additional +/-3% with the
introduction of input common mode voltage.
IC200ALG263: 15 Bit
Voltage, 15 Channel Analog Input
Analog input module IC200ALG263 provides an interface to
15 voltage inputs.
The module receives power from the backplane power supply.
No external power source is required for module operation. Power for the user’s
transceivers must be supplied from an external source.
Intelligent processing for this module is performed by the
CPU or NIU. The module provides 15 words of analog input data
Module Specifications
|
Module Characteristics |
|
Channels |
15 single ended, one group |
|
Isolation:
User input to logic (optical) and to frame ground
Group to group
Channel to channel
|
250VAC continuous; 1500VAC for 1 minute
Not applicable
None |
|
LED indicators |
OK LED indicates successful power-up, configuration,
and no hardware faults have been detected. |
|
Backplane current consumption |
5V output: 150mA maximum |
|
External power supply |
None |
|
Thermal derating |
None |
|
Configuration parameters |
None |
|
Diagnostics |
Loss of Internal Power
A/D conversion malfunction greater than 6% of full
scale |
|
Input Characteristics |
|
Input voltage |
-10V to +10V |
|
Input Impedance |
100K Ohms minimum |
|
Accuracy at:
25 degrees C*
0 to 60 degrees C
|
+/-0.3% typical of full scale, +/-0.5% maximum of full scale
+/-1% maximum of full scale
|
|
Resolution |
+/- 15 bits
0.3125mV = 1 count |
|
Filter response (3dB Corner Freq) |
32 Hz +/-20% |
|
Update rate |
7.5ms |
|
Compatibility |
|
VersaPro Software |
Version 2.0 or higher |
|
VersaMax PLC CPU Firmware |
Version 2.10 or higher |
|
VersaMax Ethernet NIU Firmware |
Version 1.10 or higher |
|
VersaMax DeviceNet, Profibus, or Genius NIU Firmware |
Version 2.10 or higher – Future Availability |
*
In the
presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be
degraded to +/-2%.
IC200ALG264: 15 Bit
Current, 15 Channel Analog Input
Analog input module IC200ALG264 provides an interface to
15 current inputs.
The module receives power from the backplane power supply.
No external power source is required for module operation. Power for the user’s
transceivers must be supplied from an external source.
Intelligent processing for this module is performed by the
CPU or NIU. The module provides 15 words of analog input data.
Module Specifications
|
Module Characteristics |
|
Channels |
15 single ended, one group |
|
Isolation:
User input to logic (optical) and to frame ground
Group to group
Channel to channel
|
250VAC continuous; 1500VAC for 1 minute
Not applicable
None |
|
LED indicators |
OK LED indicates successful power-up and
configuration |
|
Backplane current consumption |
5V output: 100mA maximum |
|
External power supply |
None |
|
Thermal derating |
None |
|
Configuration parameters |
Range select (jumpers on carrier) |
|
Diagnostics |
Loss of Internal Power, Open wire detection of
4-20mA signals only |
|
Input Characteristics |
|
Input current |
4 to 20mA (default : no terminal jumper installed)
0 to 20mA (with terminal jumper installed) |
|
Input Impedance |
100 Ohms |
|
Accuracy at:
25 degrees C*
0 to 60 degrees C
|
+/-0.3% typical of full scale, +/-0.5% maximum of full scale
+/-1% maximum of full scale
|
|
Resolution |
15 bits
0.5m A = 1 counts (for 4-20mA range)
0.625m A = 1 counts (for 0-20mA range) |
|
Filter response (3dB Corner Freq) |
24 Hz +/-20% |
|
Update rate |
7.5ms |
|
Compatibility |
|
VersaPro Software |
Version 2.0 or higher |
|
VersaMax PLC CPU Firmware |
Version 2.10 or higher |
|
VersaMax Ethernet NIU Firmware |
Version 1.10 or higher |
|
VersaMax DeviceNet, Profibus, or Genius NIU Firmware |
Version 2.10 or higher – Future Availability |
* In the presence of severe RF interference, (IEC
1000-4-3, 10V/m), accuracy may be degraded to +/-2%.
VersaMax is a trademark of GE Fanuc Automation North
America, Inc.
